The CoroCAM 6D® is a re-development of the CoroCAM Solar Blind UVc® imaging System with an emphasis on cost reduction through innovative design. Sensitivity was improved through the use of newly designed solar blind filter packs and a specially developed low noise, high sensitivity detector. Modernized electronics were added to reduce weight, system noise and size. The CoroCAM 6D® can be factory fitted with an optional motorized module which allows the camera to operate in Solar Blind (SB) or Non-Solar Blind (NSB) modes. NSB mode removes the SB filter from the light path and allows more UV light to reach the detector – this boosts the cameras sensitivity. In NSB mode the CoroCAM 6D® can only be used at night or indoors.
The CoroCAM 7® is a professional grade solar blind, easy to operate UVc imaging system used to visualize & locate electrical discharges (corona and arcing) from HV hardware. The CoroCAM 7® features the same CoroCAM® solar blind UVc imaging system as used in the CoroCAM 6d®, but pairs it with a high performance visible camera and a viewfinder. The CoroCAM 7® is typically used to inspect HV infrastructure operating at 3.3 Kv and above for corona discharges and arcing.
The CoroCAM 8® is a combined thermal IR, solar blind corona and video camera. It features a high spec Sony visible camera, a radiometric FLIR thermal IR camera and a solar blind UV camera. The CoroCAM 8® is intended for use by professional HV inspectors. The combination of these 3 cameras makes it possible to do both thermal IR and UV inspections at the same time, saving time and effort. Co-location of electrical discharges and hot spots give the inspector more insight into the cause of a fault. The CoroCAM 8® can be used to inspect HV infrastructure operating at 3.3kV and above.
